Notrax 136 Polynib Entrance Mat, for Lobbies and Indoor Entranceways, 3' Width x 4' Length x 1/4" Thickness, Gray

Notrax 136 Polynib Entrance Mat, for Lobbies and Indoor Entranceways, 3' Width x 4' Length x 1/4" Thickness, Gray Review

Buy From Amazon.com

Notrax 136 Polynib Entrance Mat, for Lobbies and Indoor Entranceways, 3' Width x 4' Length x 1/4" Thickness, Gray Feature

• A very tightly nibbed loop that entraps debris and hides it for an always elegant appearance
• Vinyl backing in corresponding colors helps reduce mat movement
• Face Weight: 24 oz. per sq. yd.
• Overall thickness of 1/4" to perform in narrow clearance doorways

Best #136 Polynib entrance mat. Polynib has the rich, luxurious look of Berber-style carpeting for an always elegant appearance. A very tightly nibbed loop of needle-punched yarn entraps and hides debris while retaining moisture at the same time. 24 ounces of carpet per square yard provides greater crush resistance for long lasting wear. Polynib comes with a heavy-weight vinyl backing in corresponding colors to help reduce mat movement and enhance the aesthetic appeal of the mat. Test - Test Description - Results: (1) Abrasion Resistance ASTM D3884-01 - Test specimen is subjected to the rubbing action of two abrading wheels under controlled conditions. Results measured in weight loss (Grams) - 1.51. (2) Accelerated Wear - Test specimen is subjected to the action of rollers under a specified load. Sample is rotated 10 degree after each pass. Results measured in thickness loss (percent) - 25.42 percent (3) Accelerated Soiling ASTM D6540-00 - Test specimen is subjected to an accelerated soiling process. for a predetermined length of time. The sample is vacuumed, rated, submitted to an extraction device, then rated again - (Based on visual inspection) 3 - Vacuum Rating 3.5 - Rating After Extraction. (4) Water Retention - Test specimen is submerged in water for 5 minutes, removed, drained for 15 seconds and weighed. Results measured in weight gain. (Gallons per square yard) - 0.45. (5) Flammability ASTM D2859 (CPSC FF 1-70) - Intended to measure the mattings response to an ignition source in a controlled environment. The uncharred area of the test specimen must be greater than 1 inch to pass - 3.6 Inches. All testing of NoTrax floor matting has been performed by an independent testing laboratory. Available in gray color. Use for indoor - entranceways, lobbies, all medium traffic areas.

Buy From Amazon.com